We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Heat-resistant submersible pump.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Heat-resistant submersible pump - List of Manufacturers, Suppliers, Companies and Products

Heat-resistant submersible pump Product List

1～23 item / All 23 items

Displayed results
[Case Study] High-Temperature Water Transfer in a Cosmetics Factory's Raw Water Pit

[Case Study] High-Temperature Water Transfer in a Cosmetics Factory's Raw Water Pit

Stable transfer is possible even at high temperatures of 80℃.

● The existing pump stops operating We received a consultation from a certain cosmetics manufacturing factory. The submersible pump currently in use is not designed for high temperatures, so it stops immediately after starting, making it difficult to transfer hot water. Therefore, we adopted the H2 JCV series, which allows for stable transfer even at high temperatures of 80°C. ● The burden on operators has been eliminated! Previously, every time the pump stopped operating, the managers had to wait for the temperature to drop or pull it up to check the situation, which was a significant burden. Since switching to the heat-resistant submersible pump JCV series, it has continued to operate stably even at high temperatures, resulting in a reduced burden on the operators.

  • 図2.png
  • 図3.png
  • 1.png
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Submersible Pump with Cutter, Heat Resistant up to 80°C, 'JCE Series'

Submersible Pump with Cutter, Heat Resistant up to 80°C, 'JCE Series'

Heat-resistant up to 80℃! This submersible pump is equipped with a cutter and is resistant to foreign objects. It has a short delivery time and a wide range of products.

The "JCE Series" is a heat-resistant submersible pump with a cutter, designed for short delivery times and competitively priced, capable of handling temperatures up to 80°C. When transporting with a land pump, there was a risk of high-temperature water spraying out in the event of a pump failure, but with the heat-resistant submersible pump, there is no risk of spraying. The JCE-16 series, made of SUS316, can handle alkaline high-temperature wastewater (boiler discharge). The JCE series is based on the popular JCV series of heat-resistant submersible pumps and is equipped with a cutter impeller, making it more resistant to foreign object intrusion. Additionally, we have also prepared the "JCVH Series," which raises the heat resistance temperature to 95°C. It is compact and features high corrosion resistance due to epoxy coating. 【Features】 [JCE Series] ○ Eliminates risks and burdens of replacement due to pump failure with a dedicated heat-resistant pump ○ Reduces the risk of failure caused by entanglement of string-like foreign objects ○ Contributes to space-saving as it eliminates the need for land pump space ○ Compatible with different voltages For more details, please contact us or download the catalog.

  • 図1.png
  • S__23412743-225x300.jpg
  • IMG_1654.JPG
  • S社耐熱水中ポンプ現場4.png
  • 耐熱水中ポンプ設置写真1-1024x768.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] "Reasons for Adopting the JCV/JCVH Series"

[Case Study] "Reasons for Adopting the JCV/JCVH Series"

Introducing examples of cases where failures due to temperature have been eliminated! We are currently offering a collection of delivery cases for heat-resistant submersible pumps!

From H2 Co., Ltd., a manufacturer of high-temperature resistant submersible pumps, various chemical liquid metering pumps, and transfer pumps, we are currently offering a case study collection titled "We Asked Our Customers: Reasons for Choosing the Pump JCV/JCVH Series" for free! In this case study collection, we present the reasons provided by our customers for purchasing H2's high-temperature resistant submersible pumps. It includes examples such as a significant reduction in failure frequency due to temperature, among other cases. This book clearly outlines the benefits of our products. [Contents] ■ No failures due to temperature ■ No risk of splashing ■ No need for installation space ■ Usable when needed ■ Abundant storage examples ■ Specialist manufacturer of heat-resistant products *For more details, please refer to the PDF document or feel free to contact us.

  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Transfer of High-Temperature Alkaline Water for Industrial Washing Machines

[Case Study] Transfer of High-Temperature Alkaline Water for Industrial Washing Machines

Space-saving high-temperature water transfer! Introducing a case study of a compact heat-resistant submersible pump.

We received a request from a certain manufacturer in Tokyo stating, "We are looking for a compact heat-resistant submersible pump," and we proposed and were adopted for the JCVH-40 model, which can withstand temperatures of up to 95°C. The application was for constructing a recycling system for wastewater discharged from high-temperature industrial washing machines. The wastewater had a high alkalinity with a pH of about 10.5, containing detergents, but the JCVH was able to handle it. Additionally, the compact size of the JCVH made it a perfect fit for integration into the equipment. The heat-resistant submersible pump JCVH-40 has a space-saving design that can be installed in an area of approximately 300×200. It can also handle a certain level of chemical liquids, making it user-friendly. We also offer models with floats, so customers considering automatic control are encouraged to consult with us. [Case Study] ■ Delivery: A certain company in Tokyo ■ Application: Transfer of high pH and high-temperature wastewater from industrial washing machines ■ Model: JCVH-40 *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.jpg
  • image_03.jpg
  • 14.jpg
  • Other water treatment equipment
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corrosion-resistant and heat-resistant submersible pump "LC-HC Series" *Heat resistance up to 60°C

Corrosion-resistant and heat-resistant submersible pump "LC-HC Series" *Heat resistance up to 60°C

Heat-resistant submersible pump that can be used with hydrochloric acid and sulfuric acid! By submerging it in water, it prevents the ejection of high-temperature chemicals and reduces installation space.

The corrosion-resistant and heat-resistant water pump "LC-HC Series" is a pump that combines corrosion resistance and heat resistance, making it usable with hydrochloric acid and sulfuric acid. It is less likely to suffer damage from corrosion or electricity, and there is no sticking due to rust or contamination of the liquid being transported. The wetted parts are made of zero metal, with the main material being a uniquely formulated FRP. It can handle liquid temperatures up to 80°C. Since the transfer is completed within the liquid, it can prevent the risk of leaks and accidents caused by splashing. 【Features】 ■ Corrosion resistance × high temperature ■ Usable with hydrochloric acid and sulfuric acid ■ Heat resistance up to 80°C ■ Eliminates the risk of splashing ■ No installation space required *For more details, please refer to the PDF document or feel free to contact us.

  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Delivery Example】JCV Type | High-Temperature Water Transfer from Drainage Intermediate Tank

【Delivery Example】JCV Type | High-Temperature Water Transfer from Drainage Intermediate Tank

Introducing a case study of the delivery of heat-resistant submersible pumps used in newly established drainage intermediate tanks.

We received an inquiry from a major cosmetics manufacturing plant regarding heat-resistant submersible pumps to be used in a newly established drainage intermediate tank. We also proposed a detachable device, and they adopted two units of "JCV-22-50." Additionally, since they requested water level control, we suggested a heat-resistant float, which was also accepted. They requested a short delivery time (two weeks after order), and upon inquiring about the situation, they mentioned, "Initially, we were proceeding with another company's product, but only the control panel's delivery was on schedule, and we just found out that the pump would not be delivered in time." Therefore, while our standard delivery time is one month after order, we shortened it to two weeks. We also provided advice on compatibility with other companies' control panels, and together with the timely delivery, we were able to meet their satisfaction. Customers considering heat-resistant submersible pumps are encouraged to contact us. [Case Study] ■ Delivery: Major cosmetics manufacturing plant ■ Application: Transfer of high-temperature water from drainage intermediate tank ■ Model: JCV-22-80 x 2 units (with detachable device) * For more details, please refer to the PDF document or feel free to contact us.

  • 事例_1.jpg
  • 事例_2.jpg
  • 事例_3.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] JCV Type | High-Temperature Water Transfer of CIP Alkaline Cleaning Wastewater

[Case Study] JCV Type | High-Temperature Water Transfer of CIP Alkaline Cleaning Wastewater

The deciding factors are delivery time and price! Here we introduce a case study of a heat-resistant submersible pump made entirely of SUS316.

We received a request from a major food company looking for a "heat-resistant submersible pump" that can be used with hot water up to 70°C. They were also concerned about corrosion resistance to alkaline substances, as it would be used for draining CIP alkaline detergents and cleaning water, so we proposed a heat-resistant submersible pump made of SUS316. It was also the perfect size for their pit dimensions. When we asked what influenced their decision, they mentioned that our delivery time (one month) was shorter compared to other manufacturers, and we also had a price advantage. Our heat-resistant submersible pump has a "standard specification" that is heat-resistant, making it excellent in terms of speed and cost. [Case Study] - Delivery: Major food factory - Application: Used for draining CIP alkaline detergents and cleaning water - Model: JCV-15-50-S16-A × 1 unit *For more details, please refer to the PDF document or feel free to contact us.

  • image_01.jpg
  • image_03.jpg
  • image_04.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant 80℃ submersible pump 'JCV Series'

Heat-resistant 80℃ submersible pump 'JCV Series'

For high-temperature boiler drainage! Heat-resistant submersible pump usable up to 80°C.

The "JCV Series" is a heat-resistant submersible pump designed to handle temperatures up to 80°C, with a short delivery time and an affordable price. When transporting with a surface pump, there was a risk of high-temperature water spraying out in the event of a pump failure, but with the heat-resistant submersible pump, there is no risk of spraying. For alkaline high-temperature wastewater (boiler discharge), the JCV-S16 series made of SUS316 can be used. 【Features of the JCV Series】 ○ Eliminates risks and burdens of replacement due to pump failure with a dedicated pump ○ Contributes to space-saving as it eliminates the need for surface pump space ○ Compatible with different voltages *For more details, please contact us or download the PDF.

  • 図1.png
  • S__23412743-225x300.jpg
  • IMG_1654.JPG
  • S社耐熱水中ポンプ現場4.png
  • 耐熱水中ポンプ設置写真1-1024x768.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant up to 95℃ Submersible Pump 'JCVH Series'

Heat-resistant up to 95℃ Submersible Pump 'JCVH Series'

Supports high-temperature water up to 95℃! A heat-resistant submersible pump with excellent corrosion resistance due to epoxy coating.

The "JCVH Series" is a submersible pump that can be used with hot water up to 95°C, designed to withstand temperatures of 95°C. Based on the JCV model, which is rated for 80°C, it features a compact design and high corrosion resistance due to its epoxy coating. It is also available with a float switch for automatic operation. It can transfer corrosive fluids such as boiler drainage and bonding liquids. 【Features】 - Excellent corrosion resistance due to epoxy coating - Compact design suitable for immersion *For more details, please contact us or download the PDF.

  • JCVH　flow.png
  • JCVH outline.png
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Hot Water Transfer in Sake Brewing

[Case Study] Hot Water Transfer in Sake Brewing

High-temperature water disinfection with heat-resistant submersible pumps!

●I want to use the hot water from the Japanese kettle in a separate process. In the sake brewery, there is a vessel called "Koshiki," which is used for soaking rice and steaming it with steam generated from below. It plays an important role in the sake-making process. The Koshiki is placed on top of a Japanese kettle filled with boiling water for steaming. The hot water from that kettle can be reused in subsequent processes, but until now, the submersible pumps had a low heat resistance, often stopping during use. ●Heat-resistant submersible pumps are effective for hot water sterilization. By using the heat-resistant submersible pump JCV series, it has become easy to make effective use of hot water. (The photo above shows the JCV type heat-resistant submersible pump being placed into the Japanese kettle.) To avoid compromising the flavor, disinfection with detergents is not used, and in sake breweries where hot water sterilization is mainstream, the hot water from the Japanese kettle is used for hot water sterilization in various locations.

  • 6.png
  • 14.png
  • 3.png
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Passed Strict Factory Equipment Standards - Adopted by Cosmetics Factory

[Case Study] Passed Strict Factory Equipment Standards - Adopted by Cosmetics Factory

Cleared the stringent standards for equipment used in factories!

● Adopted by a major cosmetics factory with strict standards for quality control and factory equipment We received an inquiry regarding high-temperature water transfer from a certain major cosmetics manufacturing factory, and they adopted our heat-resistant water pump JCV series. Since it is a cosmetics manufacturing factory, the equipment used in the factory needed to meet strict standards, resulting in a total of three units being delivered. ● Flexible specifications The user's desired delivery time was very short, and it was also necessary to reduce the specifications due to the size of the pit. H2 is capable of responding flexibly to such customer requests. If you have any issues with fluid transfer, including high-temperature water transfer, please do not hesitate to contact us.

  • 10.png
  • 16.png
  • 4.png
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Delivery Example】pH 12.5, Liquid Temperature 70℃ - Delivered to a Major Steelworks

【Delivery Example】pH 12.5, Liquid Temperature 70℃ - Delivered to a Major Steelworks

Transport of alkaline high-temperature wastewater

● Adopted for the transport of alkaline high-temperature wastewater We received an inquiry about high-temperature water transport from a major steelworks, and they chose our heat-resistant water pump, the JCV series. Due to the alkaline nature of the wastewater, it is made entirely of stainless steel, and it successfully cleared the silica-based SS concentration without any issues. Liquid specifications: pH 12.5, SS = 50 ppm (silica-based SS), liquid temperature 70°C ● Short delivery times for different voltages are also possible The request was for 440V three-phase, and we can accommodate it with the usual delivery time for all-stainless steel. While other companies' 440V pumps may take about three months for delivery, H2, which specializes in manufacturing heat-resistant water pumps, can ship in about half that time. If customers are struggling with poor delivery times when their pumps from other manufacturers fail, please feel free to consult us.

  • 21.png
  • 22.png
  • スライド5.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Delivery Example] High-temperature water transfer containing boric acid and aluminum phosphate

[Delivery Example] High-temperature water transfer containing boric acid and aluminum phosphate

Cool down to 95℃ from 100℃ and transfer!

●Cooling 100℃ boric acid and aluminum phosphate-containing water and transferring it with a submersible pump We received an inquiry from a wood processing manufacturing company in Fukuoka Prefecture, stating, "We would like to transfer a chemical fluid containing boric acid and aluminum phosphate at 100℃ from a drum using a submersible pump." The concentrations were each below 20%, but we proposed the JCVH type, which has high corrosion resistance due to its epoxy coating, considering both temperature and corrosion resistance. ●Cooling from 100℃ to 95℃ for transfer! The heat-resistant submersible pump JCVH type has a heat resistance temperature of 95℃, so they were satisfied with the operation of lowering the 100℃ hot water to 95℃ for use. We received feedback that they have been able to transfer without any issues after the installation.

  • 薬液タンク内-1024x768.jpg
  • 8.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] High-Temperature Water Transfer of 95℃ Boiler Drainage

[Case Study] High-Temperature Water Transfer of 95℃ Boiler Drainage

Transporting 95℃ boiler drain water with a heat-resistant submersible pump!

●Transporting 95℃ boiler wastewater with a heat-resistant submersible pump We received an inquiry from a trading company in Shizuoka Prefecture, stating, "We would like to transport 95℃ weak alkaline boiler wastewater." We proposed the JCVH type submersible pump, which has a proven track record for handling boiler wastewater at 95℃. They appreciated its reliability and ease of use, leading to its adoption. After implementation, the feedback was positive, and they quickly placed a repeat order for another unit, resulting in a highly satisfactory case.

  • 9.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Delivery Case] Transportation of 80℃ High-Temperature Cleaning Water

[Delivery Case] Transportation of 80℃ High-Temperature Cleaning Water

Introducing a case of submersible pump delivery for the transfer of high-temperature water discharged during the cleaning process!

A waste disposal company in Saitama Prefecture consulted us about wanting to transfer high-temperature water discharged during the cleaning process using a submersible pump. Since the temperature was 80°C, we proposed the JCV type submersible pump with a float for ease of use. After several months of operation, they confirmed that there were no issues with transferring the high-temperature water, and they placed a repeat order for another unit to be used at a different site. The submersible pump that frees users from concerns about the dangers, cavitation, and installation hassles associated with transferring high-temperature water has received positive feedback. If there is no installation space in the tank, we can also propose a heat-resistant surface pump. [Case Study] ■ Delivery: Waste disposal company in Saitama Prefecture ■ Application: Transfer of 80°C high-temperature cleaning water ■ Model: JCV-7-50-A *For more details, please refer to the PDF document or feel free to contact us.

  • IMG_2356-768x576.jpg
  • スライド11.jpg
  • Other water treatment equipment
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Delivery Example] High-Temperature Water Transfer into Grease Trap

[Delivery Example] High-Temperature Water Transfer into Grease Trap

Before the neutralization treatment of boiler drainage! Case study of a heat-resistant submersible pump that can be installed in a small space.

A food factory in Saitama Prefecture has ordered neutralization treatment equipment for boiler drainage and wastewater treatment in the food manufacturing process. The JCVH-40-A was adopted for transferring to the neutralization tank. Since the temperature was up to 95°C, we selected the JCVH type submersible pump with a float for ease of use and heat resistance. The wastewater flows into a temporary grease trap, so it was necessary to transfer it from there to the neutralization tank. However, the JCVH type submersible pump is designed to be compact, allowing for easy installation without issues. Even when the water level is low, the float height can be finely adjusted, allowing for customizable ON-OFF range. Additionally, while the pH of the wastewater may lean towards acidic or alkaline, the JCVH is fully covered with epoxy coating, ensuring chemical resistance. [Case Study] ■ Delivery: Food factory in Saitama Prefecture ■ Application: Transfer of boiler drainage flowing into the grease trap ■ Model: JCVH-40-A *For more details, please refer to the PDF document or feel free to contact us.

  • 180209_0074-768x576.jpg
  • 12.png
  • Other water treatment equipment
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] High-Temperature Water Transfer in Recycling Material Processing Process

[Case Study] High-Temperature Water Transfer in Recycling Material Processing Process

Introducing a case study of the delivery of heat-resistant water pumps for the assembly and circulation of hot water (80°C) in cooling water tanks!

We received an inquiry from a recycling-related factory in a certain location in Aomori Prefecture. The temperature of the transfer water is 80°C, while the existing pump was rated for a maximum temperature of 60°C. Therefore, we selected and delivered the heat-resistant submersible pump JCVH-40 (rated for 95°C). Although it was said that the existing pump deteriorated quickly, we received positive feedback that the operation of the JCVH model is going well. By using the appropriate pump, it is possible to slow down the rate of deterioration. If you are having trouble with fluid transfer or would like to make improvements, please feel free to consult us. 【Case Study】 ■ Delivery: A certain location in Aomori Prefecture ■ Application: Transfer of hot water from cooling water tank ■ Model: JCVH-40 *For more details, please refer to the PDF document or feel free to contact us.

  • 耐熱水中ポンプ2.JPG
  • 13.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Collection of Applications for Surface Treatment by Purpose

Collection of Applications for Surface Treatment by Purpose

Introducing a range of products that excel in surface treatment processes, starting with the filtration of bonding liquid, categorized by application!

This catalog features a range of products that are active in surface treatment processes, including the filtration of bonding liquids, categorized by application. We introduce products such as the "JCV Series," which can transfer bonding liquids (at 80°C) using submersible pumps, and the "JCVH Series." The features and specifications are presented clearly with photos and diagrams. [Contents (partial)] ■ Transfer of bonding liquids ■ Collection and filtration of bonding liquids ■ Injection and replenishment of chemical solutions ■ Others ■ JCV Series *For more details, please refer to the PDF document or feel free to contact us.

  • Filtration Equipment
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Transfer of 80°C High-Temperature Wastewater at a Dairy Factory

[Case Study] Transfer of 80°C High-Temperature Wastewater at a Dairy Factory

Easy retrieval and reinstallation from the pit! Introducing a case study of heat-resistant submersible pumps.

We delivered two units of the heat-resistant submersible pump "JCV-22-50" in conjunction with the factory upgrade of a major dairy manufacturer. By selecting the detachable device, the site has become easier for lifting and reinstalling during regular maintenance from the pit. Our heat-resistant submersible pumps are used in many factories across various industries, with many choosing us for our "price" and "delivery time." We also offer a wide range of options, including detachable devices, all materials in SUS316, float switches, and extended cable lengths. [Case Study] - Delivery: Major dairy manufacturer - Application: Transfer of 80°C high-temperature wastewater - Model: JCV-22-50 (with detachable device) x 2 units *For more details, please refer to the PDF document or feel free to contact us.

  • image_01.png
  • image_02.png
  • image_04.png
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Adopted by a Major Plant Manufacturer! Boiler Drainage Transfer

[Case Study] Adopted by a Major Plant Manufacturer! Boiler Drainage Transfer

The deciding factors are price and delivery time! Introducing case studies of heat-resistant submersible pumps.

To our industrial waste disposal contractors, we have delivered our heat-resistant submersible pump in conjunction with the supply of boiler equipment from a major plant manufacturer. The selection was made after discussions with the plant manufacturer, and we chose SUS316 material to withstand the alkalinity of the boiler discharge. Additionally, to facilitate maintenance, the pump was delivered with a detachable device. As this was the first time the plant manufacturer used our products, they appreciated our support regarding usage instructions and the installation of the detachable device after delivery. If you are looking for a heat-resistant submersible pump, please feel free to consult with us. 【Case Study】 ■ Delivery: Industrial waste disposal plant ■ Application: Transfer of 80℃ high-temperature boiler discharge ■ Model: JCE-15-50-S16 (with detachable device) × 1 set *For more details, please refer to the PDF document or feel free to contact us.

  • 2.jpg
  • 3.jpg
  • 4.jpg
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Case Study】Cooling Drainage Pumping Treatment

【Case Study】Cooling Drainage Pumping Treatment

High corrosion resistance with epoxy coating! Introducing a case study of heat-resistant submersible pumps.

This is an introduction to a case where we delivered the heat-resistant submersible pump 'JCVH-40' to Kanto Chemical Factory. We received a consultation from the person in charge stating, "In the past, the motor was burned out due to temperature," and after we promoted our heat-resistant submersible pump, they appreciated our specialization as a dedicated pump manufacturer and the numerous successful cases we have, leading to their adoption of our product. After the introduction, the feedback has been positive, and they quickly placed a repeat order for another unit, resulting in a highly satisfactory case. Our company offers a range of equipment that is useful for streamlining wastewater treatment, including the transfer of high-temperature water and oil recovery, so please feel free to contact us. [Case Details] ■ Delivery: Resin raw material manufacturing factory ■ Application: Transfer of cooling wastewater ■ Model: Heat-resistant submersible pump JCVH-40 *For more details, please refer to the PDF document or feel free to contact us.

  • image_05.png
  • サブ.png
  • Wastewater/wastewater treatment equipment
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Delivery Case】Transportation of Hot Spring Drainage (High-Temperature Water)

【Delivery Case】Transportation of Hot Spring Drainage (High-Temperature Water)

Introducing examples of heat-resistant submersible pump deliveries that accommodate pit sizes and offer easy control!

This is an introduction to a case where a heat-resistant submersible pump "JCV-15-50-A" was delivered to a hot spring resource utilization facility in Tottori Prefecture. It is used to pump hot spring wastewater from the underground bath pit, and we proposed the JCV type with a float. The float of the heat-resistant submersible pump is, of course, heat-resistant, making it particularly useful in cases where there is no room to install electrodes in a narrow pit. Additionally, since the float is directly attached, control through a control panel is unnecessary. Automatic ON-OFF control according to the water level is possible while the power is on. [Case Details] ■ Delivery: Tottori Prefecture Hot Spring Resource Utilization Facility ■ Application: Transportation of hot spring (high-temperature water) ■ Model: Heat-resistant submersible pump "JCV-15-50-A (with heat-resistant float)" *For more details, please refer to the PDF document or feel free to contact us.

  • image_10.png
  • image_11.png
  • image_12.png
  • Wastewater/wastewater treatment equipment
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Pump Delivery Case] Transfer of High-Temperature Bonding Liquid

[Pump Delivery Case] Transfer of High-Temperature Bonding Liquid

I want to transfer high-temperature bonding liquid to the upper floor! Make the transfer of dangerous high-temperature fluids safer and easier.

We have received a consultation from a major automotive parts manufacturer, Company S, stating that they are troubled by frequent failures of the submersible pump they have been using until now. The current submersible pump is unsuitable for both temperature (80 degrees) and corrosion resistance, so they have adopted our heat-resistant submersible pump (made entirely of stainless steel). The liquid used is bonding liquid (zinc phosphate) which is high-temperature and contains slurry. The pump was installed underwater with the aim of transferring from the second floor to the third floor. [Reasons for Adoption] ■ Extensive track record as a heat-resistant submersible pump (adopted by other major automotive parts manufacturers) ■ Flexible response as a manufacturer to special specifications ■ Short delivery time ■ Low price *For more details, please refer to the PDF document or feel free to contact us.

  • 2022-01-11_09h34_02.png
  • Other pumps
  • Heat-resistant submersible pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Heat-resistant submersible pump

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.